Thermo King - Nieuwe 20ft Reefer Container

Thermo King

Standard Features

R-404A refrigerant
Scroll Compressor with Digital Control Valve for capacity modulation, economizer circuit, ambient compensated internal overload and high temperature protection
Proportional-integral differential (PID)
Refrigeration capacity control system
Non-corrosive maritime construction, which includes
 a marine-treated aluminum alloy frame, non-corrosive
 fittings, stainless steel hardware, condenser coil
 with epoxy e-coat and polyurethane top coat for
 UV protection, hydrophilic coating on evaporator coil,
 and a marine duty protective coating on the compressor
Condenser and evaporator fan motors, which include
 stainless steel shafts and internal thermal overload
 protection

CFC-free, foamed-in-place insulation
Wired for 380/460 volt, three-phase, 50/60 Hz power
 supply with an 18 meter (60 ft) 11/4 power cable
 with CEE-17 plug
Bottom air discharge
Automatic electronic phase correction system
29 Vac control system
On-demand defrost combined with
 intelligent timed defrost
Manual defrost with initiation via MP-4000
Indicator lights, which include Alarm,
Alarm acknowledges, in range,
 and approaching in range
Time delay start sequence
Composite condenser and evaporator fans
Conforms to ISO classifications and specifications
 for thermal containers, including:
 racking and end-loading standards, TIR specifications,
 ATP refrigeration standards, ARI standards for rating
 refrigeration capacity, UIC international Union
 of Railways, Australian Electrical Certification,
 British Standard 3755 Requirement (TAINT),
 USDA requirements for “Insect Cold” treatment,
 and Agrotechnological Research Institute (ATO-DLO)
 for flower bulb transportation
Auxiliary battery and charger
USDA “Cold Treatment” provision

Options
AFAM+ Advanced Fresh Air Exchange Management
Water Cooler Condenser
Thermo King electronic chart recorder
Partlow temperature recorder
Saginomiya Temperature recorder
Remote monitoring
Transfresh provision
10/4 power cable
De-humidification

Specificaties

Externe afmetingen Interne afmetingen Deuropening Machines specificaties
Lengte 6058 mm Lengte 5451 mm Breedte 2286 mm Machine type Various
Breedte 2438 mm Breedte 2298 mm Hoogte 2260 mm Status PTI OK / Plug in ready
Hoogte 2591 mm Hoogte 2291 mm     Temp. bereik - 25c / + 25c
    Vloeroppervlak 12,1 m²     Kracht 380V, 32 amp, 50/60hz
    Capaciteit 28.3 m³        
« Back

Contact